rpi-rgb-led-matrix as built into hako ===================================== hako drives its 64x64 LED panel with rpi-rgb-led-matrix by Henner Zeller, licensed under the GNU General Public License version 2 (COPYING.txt). This folder is the complete corresponding source for the copy on every hako: rpi-rgb-led-matrix-14464b3.tar.gz Upstream https://github.com/hzeller/rpi-rgb-led-matrix at commit 14464b3ad8974665f75a3c82355cf872311fec21 (2026-10-10), unmodified. SHA-256 7c322e7d0d2df56fb2ad62a26673f3d75d60eed64ced6f42d4d8242fea1db8f9 Build ----- On a Raspberry Pi 3 Model A+ running Raspberry Pi OS Lite (Bookworm, 32-bit): sudo apt-get install -y --no-install-recommends \ python3 python3-dev python3-pip build-essential cmake cython3 tar xzf rpi-rgb-led-matrix-14464b3.tar.gz sudo pip3 install --break-system-packages ./rpi-rgb-led-matrix-14464b3 That builds the C++ library and the Python binding ("rgbmatrix") with the default build configuration (no changes to config.mk or CMake options). Runtime options --------------- hako sets these when it opens the panel (they are not build settings, but they are what you need to reproduce how hako runs it): rows=64 cols=64 chain_length=1 parallel=1 hardware_mapping=adafruit-hat-pwm panel_type=FM6126A row_address_type=0 multiplexing=0 scan_mode=1 pwm_bits=8 gpio_slowdown=2 limit_refresh_rate_hz=100 brightness=60 drop_privileges=False Offer ----- This source stays here for at least three years after the last hako ships. If it ever goes missing, email hello@hakoshop.com and we will send it to you on physical media for no more than the cost of doing so.